Custom Rifles                                                                                   Click on Thumbnail.



John Bolliger Custom Mauser G.33/40 .270 Win. $11,250

22 1/2" tapered round barrel with interchangeable muzzle brake and plain,

flush-mounted cap. Highly figured American black walnut stock with

widow's-peaked ebony forend tip, classic wrap-around point-pattern

checkering with mullered borders and extra detailing behind steel pistol grip

cap, slight palm-swell, classic comb, beaded cheekpiece, inletted

escutcheoned sling swivel bases and Niedner-type checkered steel

buttplate. G.33/40 Mauser action with jeweled bolt, three-panel checkered

bolt knob, Model 70-type safety, Blackburn bottom metal with hinged

straddle floorplate and release inside triggerguard. Swarovski Z6i 1.7-10x42

illuminated 30mm matted-finished scope with fine 4A duplex reticle and two

interchangeable turrets for different elevations on Talley rings fitted to

Bolliger's own sculptured double-squarebridge bases. Pull: 14". Weight:

9lbs, 0oz. Very little used.

.

Classic Arms Corporation Custom Squarebridge Mauser .300 H&H Mag. $11,750

24" tapered round barrel with full-band detented-hooded front sight, full-

band sling swivel base, hand-crosshatch-matted quarter rib with 1 standing

and 3 folding gold-lined express sights engraved for 100, 200, 300 & 400

yards. Fully figured Circassian walnut stock by James Tucker with ebony

forend tip, classic point-pattern checkering, engraved recoil crossbolt, steel

trapdoor pistol grip cap, beaded pancake cheekpiece, maker's leather sling

on refined SuperGrade swivels, and dark brown pigskin-covered recoil pad.

Original Mauser commercial squarebridge action with Crown/B Crown/U

Crown/G proofs, straight-down bolt handle with 3-panel checkered knob

with rosette, checkered trigger, both original Mauser wing and custom sliding top-tang

safety with SAFE and FIRE inlaid in gold, and hinged floorplate with release inside

triggerguard. Zeiss Diavari-C 1.5-4.5 x 18 scope with duplex reticle on

custom claw mounts---the front fitted directly to the quarter rib; the rear to

the original squarebridge---both without separate bases. Fine foliate scroll

engraving on pistol grip cap and bottom metal and with high-relief gold

moose head on floorplate by Robert Swartley. Metalwork by Steve Hielmann.

Bluing by Tony Fleming. Pull: 14 1/4". Weight: 9lbs, 12oz. Test fired only.

.

Classic Arms Corporation Custom Mauser Oberndorf .338 Win. Mag. $7,250

24" tapered round barrel. Fully figured walnut stock, carved out of a pre-war

French walnut blank from Dale Goens, by Reto Buehler with ebony forend

tip, classic point-pattern checkering, recoil crossbolt, steel pistol grip cap,

beaded pancake cheekpiece, maker's leather sling on refined SuperGrade

swivels, and Silver's solid red rubber recoil pad. Original Mauser commercial

action with Crown/B Crown/U proofs, straight-down bolt handle with 3-panel

checkered knob, checkered trigger, Model 70-type safety, and hinged floorplate

with release inside triggerguard. Leupold Vari-X III 3.5-10x scope with fine duplex

reticle on Conetrol mounts. Detail scroll engraving by Terry Wallace. Bluing

by Tony Fleming. Pull: 14". Weight: 9lbs, 13oz. Test fired only. With

C.A.C.-engraved snap cap.

.

Classic Arms Custom Ballard .38-56 $12,995

Corporation                   Two-Barrel Set .28-30 Stevens

Two, 27" tapered round barrels with full-length solid matted rib, raised at

muzzle for blade front sight and fitted with scope blocks for Unertl 6x target

scope with fine crosshair reticle. Figured Circassian walnut stocks by James

Tucker with ebony schnabel forend tip, classic point-pattern checkering,

steel capped pistol grip, beaded pancake cheekpiece, classic comb, and steel

trapdoor buttplate. Color-casehardened receiver with double-set triggers,

finger-loop loading lever, floral scroll engraved by Lee Griffiths. Folding

tang peep sight adjustable for windage and elevation. Metalwork and

bluing by Anthony Fleming. Pull: 14 1/2". Weight: 9lbs, 10oz. In full-length

oak & leather trunk case with canvas overcase, fitted with custom tools by

John Millar. New condition

.

Classic Arms J Rigby Model Ballard. .450 Rigby $13,975

Corporation Rifle No.45 Match

34" tapered round barrel with spirit-level windgauge front sight with

replaceable inserts and with Rigby flats at breech. Lightly figured walnut

stocks by James Tucker with horn schnabel forend tip, classic flat-top point-

pattern checkering with mullered borders, fire-blued crosspin fastener in

engraved escutcheons, horn-capped pistol grip, engraved and hand-

checkered steel buttplate. Marlin Ballard action engraved with acanthus

scroll by Charles Lee with checkered single trigger and curved open-loop

loading lever. Both front sight and long range vernier tang sight by Mike

Stevens. Pull: 15 5/8". Weight: 10lbs, 4oz. New, as test fired only. In full-

length Jatoba wood and leather trunk case by Ray Sterck, with loading dies,

keys, extra tang sight disc, square crystal oil bottle, wood and cork loading

mallet, English bullet mold, extra front sight inserts, 20 brass cases , cleaning

rod and tips, and canvas overcase.

.

Classic Arms Custom Winchester High Wall 20/.577 Alex $19,450.

Corporation Takedown Two-Barrel Set. Henry Rifle &

Rifle No.20 20ga Shotgun

30" knurled, flat-top, tapered, ovoid, heavy, Krieger, Henry-rifled barrel with

integral raised-ramp front sight, 1 standing white-inlaid and 1 folding

platinum-lined express sight. 30" round smoothbore barrel with solid,

integral, knurled rib, ivory front bead, choked extra full. Both barrels shaped

by Ralf Martini. Highly figured Circassian walnut stocks with two separate

forends, each with Alex Henry-style horn forend tips, casehardened-

escutcheoned fire-blued crosspin fasteners, classic flat-top point-pattern

checkering with mullered borders (wrapping fully under the forend), and a

machined, knurled and engraved threaded breech cap for each barrel.

Casehardened steel trapdoor pistol grip cap, beaded pancake cheekpiece,

and pigskin-covered recoil pad. Original Winchester 1885 Thickside

takedown action converted to blind-tang throughbolt system, with

checkered custom single trigger and with bottom tang extended to grip cap,

extensively engraved by Lee Griffiths with deep-incised scenes of the

extinct giant Irish elk on each side of the receiver and a very fine Scottish

heraldic Lion Rampant on the grip trapdoor. Pull: 14 1/2". Weight: 10lbs,

10oz as a rifle; 7lbs, 13oz as a shotgun. All in oak and leather takedown

trunk case by Ray Sterck, with leather-trimmer canvas overcase, fitted with

accessories by John Millar including fluted horn-handled turnscrew,

chamber brush and cleaning rod with tips, engraved-topped patchbox and

crystal oil bottle, traditional brass bullet mold, sample cartridge & paper-

patched bullets, and key. .22 Long Rifle chamber insert for 20/.577 barrel. A

second, matching oak & leather case incudes an extensive selection of

loading tools, supplies and accessories.

.



Classic Arms Custom George Gibbs .22 Long Rifle, $22,750
    Corporation
Baby Farquharson .28-30 Stevens & .360 No.5

Three Barrel Set  

28" tapered round .22LR barrel by Ron Smith with original Gibbs target

spirit-level front sight and Rigby flats at breech; engraved Classic Arms

Corporation.

28" tapered round .28-30 Stevens barrel by Ron Pence with ramp front sight,

1 standing and 2 folding leaf rear sights on matted quarter rib, Parker-Hale 3x

Huntascope with fine crosshairs reticle on their proprietary hand-

detachable rings fitting directly to quarter-rib dovetails without separate

bases, and with Rigby flats at breech; engraved Classic Arms Corporation.

26" tapered octagon .360 No.5 original Gibbs barrel restored by Steve

Heilmann, with blade front sight, 1 standing and 1 folding leaf rear sight

marked 50 and 100 yards; engraved Gibbs, Bristol.

Stocks by James Tucker, with figured California English walnut harvested in

1965, including three separate matching forends, each with horn forend tips,

keyed fasteners in engraved escutcheons, classic flat-topped point-pattern

checkering with mullered borders, flat sidepanels fore & aft, horn-capped

pistol grip, and smooth steel buttplate. Furniture by Don Brown. Vernier

tang sight by Joe Lozito.

Casehardened, miniature Gibbs Farquharson falling block action with

sidelever safety, rebuilt by John Wills, with new pins, new interchangeable

rimfire breechblock and extractor, and upper tang with integral boss for

mounting tang sight. Extensive fine English scroll engraving by Larry Peters.

Pull: 13 5/8". Weight 7lbs, 4oz as an iron-sighted .22 rimfire.

In Ray Sterck oak & leather case with brass corners and engraved brass

escutcheon, lined in blue baize. With 3 fluted-horn-handled turnscrews,

horn-handled cleaning rod with selection of tips, machined and fire-blued

steel oil bottle, grease-pot, and container holding extra breechblock and

small parts for centerfire cartridge barrels, 2 machined breech thread covers,

and keyed brass case latch, all by John Millar. Extra inserts and tools for

.22LR barrel sprit-level front sight. 20 rounds machined .360 No.5 brass with

engraved headstamps, 20 rounds new Bertram .28-30 Stevens brass, original

(empty) box for Eley .360 No.5 cartridges. Vintage .360 No.5 snap cap.

Instructions for changing barrels and stocks. Trade labels for both Classic

Arms Corporation and George Gibbs. Leather trimmed canvas overcase and

 muslin overcover. New, by Classic Arms Corporation.




Classic Arms Custom DWM Mauser .300 Win. Mag. $7,250
    Corporation
1909 Argentine

26" tapered round Krieger barrel. Fully figured European walnut stock by

Duane Weibe with ebony forend tip, detachable swivel studs, classic wrap-

around point-pattern checkering, steel-capped pistol grip, beaded pancake

cheekpiece, and solid black rubber Decelerator recoil pad. Metalwork by

Steve Heilmann: DWM Mauser 1909 Argentine action with Model 70-type

safety by Jasper Raybourn, Timney trigger with checkered lever, fire-blued

extractor, three-panel checkered pear-shaped bolt knob, and Wisner solid

bottom metal with dozens of lightning holes drilled in magazine box and

hinged straddle floorplate with release inside triggerguard. A touch of fine

scroll engraving detail by Robert Swartley. Leupold Vari-X III 3.5-10x50mm

matte-finish scope with bold duplex reticle on skeletonized rings. Finish

work by Pete Mazur. Pull: 14 1/8". Weight: 9lbs, 8 1/2oz. Classic Arms

Corporation Rifle No.30. Built early 1980s. New, from the maker. With Classic

Arms Corp leather sling on refined Winchester SuperGrade swivels.

.

Classic Arms Corp. Custom Mauser.   Rifle No.17 .300 Win. Mag. $5,995

24" tapered round barrel. Fully figured European walnut stock by Duane

Weibe with ebony forend tip, detachable swivel studs, classic wrap-around

point-pattern checkering, steel-capped pistol grip, beaded pancake

cheekpiece, and solid red rubber recoil pad. Mauser Standard Modell action

with B/U/G/N commercial proofmarks, Model 70-type safety, checkered

Canjar trigger, two-panel checkered pear-shaped bolt knob, drop-box hinged

straddle floorplate with release inside triggerguard. Lightly, but well scroll

engraved by C Kane and with a buck on the floorplate. Leupold LPS 3.5-

14x52mm matte finish scope with parallax adjustment, 30mm tube and fine

duplex reticle. Pull: 13 7/8". Weight: 9lbs, 6 1/2oz. Classic Arms Corporation

Rifle No.17 with excellent bore. 99% blue.

.

Classic Arms Corp. Rifle No.13 6mm Remington $13,950

Custom Winchester 1885 High Wall

27 1/2" barrel by Ron Smith, with flat-topped ovoid profile by Ralf Martini;

beaded blade front sight, one standing gold-triangle-inlaid and 1 folding

gold-line inlaid express sights, and broad sling swivel stud. Fully figured

California English walnut stocks by Reto Buehler with ebony forend tip,

steel capped pistol grip, classic point-pattern checkering, beaded pancake

cheekpiece, rear swivel stud, and smooth steel Biesen shotgun buttplate.

Original Winchester Model 1885 High Wall action with double-set trigger

and with no visible tang screws either top or bottom. Leupold Vari-X III 3.5 -

10x scope with fine duplex reticle on refined Talley quick-detachable

mounts with custom levers. Classic Arms leather sling on Winchester

SuperGrade swivels. Scroll engraved by Lee Griffiths on action, lever, grip

cap, buttplate. Pull: 14 1/8". Weight: 9lbs, 6oz. New, as custom built. With

breech-end cleaning rod guide, MCA Sports .22LR adapter, and unloading

tool by James Tucker.

.

Classic Arms Corp. Rifle No.32 .22 Hornet $14,650

Custom Webley Model 1902 Falling Block

25 1/2" Fraser style tapered round barrel by Ron Smith with full-length

smooth solid rib by A Fleming, rising at the muzzle for a beaded blade front

sight, and towards the rear for a quarter rib bearing a single standing

express sight engraved for 100 yards. Fully figured walnut stocks by James

Tucker with ebony forend tip, flat sidepaneled fore and aft the action, steel

capped pistol grip, classic point-pattern checkering with mullered borders

and with flat-pointed diamonds at the wrist, beaded pancake cheekpiece,

and checkered steel trapdoor buttplate. Light scroll engraved, subtly grey-

etched, cylindrical falling block action marked Webley 1902 Patent and with

their winged bullet on the right, and engraved Jn. Rigby & Co. on the left,

and with automatic top tang safety with SAFE inlaid in gold. Mountless 10x

target scope with very fine crosshair reticle on elegant diminutive John

Millar recoil-absorbing rings fitted directly to the quarter rib without

separate bases, with windage adjustments in both bases and both windage

and elevation knobs in the rear ring. Pull: 14 5/8". Weight: 10lbs, 2oz. New,

as custom built.

.

CZ Model 527-FS Full Stocked Rifle .223 Rem. $4,350

20" tapered round barrel with ramp front sight, barrel-band tie-down, and

standing blade rear sight on integral island base. Custom stocked to the

muzzle by Mike Connor with fully figured walnut, steel forend cap,

borderless wrap-around fleur-de-lys checking, steel pistol grip cap, beaded

left-hand pancake cheekpiece, European sling swivels, and Biesen checkered

steel buttplate. Marked .22 Hornet but chambered for .223 Rem. Right-

handed, controlled-feed action with detachable box magazine for .223.

Swarovski Z3 3-9x36 scope with 4A duplex reticle on CZ rings fitting directly

to receiver dovetailed double squarebridges without separate bases. Pull:

13 3/4". Weight: 7lbs, 8oz. Action built 1995. 99%blue.

.

Winston Elrod Custom Winchester Model 70 .338 Win. Mag. $6,950

23 1/2" tapered round Krieger barrel with detented-hooded integral-full-band

front sight, integral-full-band swivel base, one standing and one folding

express sight on machined integral matted quarter rib. Fully figured English

walnut stock with ebony forend tip, classic point-pattern checkering with

mullered borders wrapping fully under the forend and over the wrist, steel

pistol grip cap, beaded cheekpiece, inletted rear swivel base, and

Decelerator solid red rubber recoil pad. Pre-'64 Winchester Model 70 action

with 5-panel checkered bolt knob, built-up and checkered bolt stop, and

Blackburn bottom metal with hinged straddle floorplate and release inside

triggerguard. Leupold VX-III 3.5-10x40mm matte-finish scope with fine

duplex reticle on Talley fixed mounts. Pull: 13 3/4". Weight: 9lbs, 6oz. Little used.

 

Goudy, Waldron & Wallace Custom Ruger Model 77 .25'06 $7,995

24" tapered round barrel. Fully figured European walnut stock by Gary

Goudy with ebony-inlaid sculptural schnabel forend tip, inletted and

pedestalled sling swivel bases, fine borderless wrap-around ribbon and

fleur-de-lys checkering, skeleton pistol grip cap (checkered within), classic

comb with beaded cheekpiece, and skeleton buttplate (also checkered

within). Metalwork by Herman Waldron: extensively streamlined Ruger

Model 77 controlled-feed action with jeweled bolt and follower, straight-

down bolt handle with three-panel checkered bolt knob, Model 70-type

safety, Canjar single-set trigger, scope rings fitted directly to discreetly-

remaining receiver dovetails without separate bases, and completely custom

solid bottom metal with hinged straddle floorplate and unique release latch.

Extensively engraved by Terry Wallace: fine floral scroll on scope rings,

receiver, buttplate, grip cap and bottom metal, including a golden-horned

ram on the floorplate. Pull: 13 5/8". Weight: 7lbs, 7oz. Built 1988. Very little used.

.

Hastings & Hagn Custom Falling Block Rifle 20ga, 3 1/2" $10,950

26" fully-rifled round barrel with integral long full-band front sight, integral

full-band swivel base, and integral lugged quarter rib dovetailed for direct

attachment of [included] Talley 1" fixed rings and with 1 standing and 2

folding gold-lined express sights. Fully figured Turkish walnut stock with

Alex Henry forend---the barrel's stout lug-grooves soundly bedded in

complementary grooves inside the forend---classic English flat-top point-

pattern checkering with mullered borders, flat sidepanels fore and aft, steel-

capped pistol grip, beaded pancake cheekpiece, rear swivel stud and

pigskin-covered recoil pad. Casehardened, large-frame Hagn MHK4 falling

block action with sculptured loading lever, automatic ejector and gold-inlaid

rotary top tang safety, marked Martini & Hagn on falling block, fine scroll

engraved and with "HASTINGS & HAGN" in ribands on sides of action.

Pull: 14 1/4". Weight: 9lbs, 7 1/2oz without scope rings. Excellent condition,

retaining 99% barrel blue, 99% casehardening colors, and an excellent bore.

Built as a display piece for Hastings Ammunition and including a case of

100 rounds of Hastings 20 gauge, 3 1/2" sabot slug ammunition.

.

Lee Helgeland Custom Winchester .458 Win. $23,975

Model 70 Classic

22" tapered round barrel with hooded full-band front sight, full-band swivel

base, and quarter rib with 1 standing and two folding gold-lined express

sights. Fully figured walnut stock with ebony forend tip, classic wrap-

around point-pattern checkering with mullered borders, twin recoil

crossbolts, steel-capped pistol grip, classic comb, double-beaded pancake

cheekpiece, inletted rear swivel base and leather-covered recoil pad.

Winchester Model 70 controlled-feed action with custom bolt handle with

five-panel checkering, built up and checkered bolt stop, FIRE inlaid in gold,

cloverleaf rear top tang, and Blackburn hinged straddle floorplate with

release inside triggerguard. Extensively engraved by Barry Lee Hands: deep-

chiseled scroll on front sight band and hood, front swivel base, barrel

breech, receiver, bolt, recoil bolts, triggerguard, grip cap, and rear swivel

stud. Scenes of nine elephant on left side of quarter rib, five on right; and

bull elephant surrounded with deep-chiseled scroll on floorplate. Pull: 14

1/2". Weight: 8lbs 12oz. Completed in 2011. New condition.

.


Darwin Hensley Mauser, Oberndorf .460 Wby. Mag. $11,950

Magnum Double Squarebridge

24" tapered round Krieger barrel with integrally-machined "full-band" ramped

gold bead front sight, integrally-machined "full-band" sling swivel mount,

integral recoil lug and integral matted quarter rib with 1 standing and 2

folding gold-lined express sights engraved for 100 & 250 yards respectively.

Boldly-streaked straight-grained European walnut stock with ebony forend

tip, fine classic borderless point-pattern checkering wrapping fully under the

forend, a panel of finer checkering atop the wrist with fine ribbon borderlines,

twin engraved recoil crossbolts, steel capped pistol grip, beaded pancake

cheekpiece, inletted rear swivel stud, and solid black Decelerator recoil pad.

Mauser Oberndorf Magnum Double-squarebridge, solid-sidewall action with

six-panel checkered bolt knob, Model 70-type safety, Original Mauser trigger

converted to single-stage, and bottom metal with hinged straddle floorplate

and release inside triggerguard. Zeiss Diatal-Z 4x32 T* rail-mount scope

with fine crosshair reticle on quick-detachable claw mounts. Extensively

engraved by Thierry Duguet, the receiver and grip cap with acanthus scroll;

the bottom metal with a staring cape buffalo and attendant picket birds

surrounded with acanthus scroll. Pull: 14 3/4". Weight: 10lbs, 1oz without

scope; 10lbs, 14 1/2oz with. Mauser action built ca 1935. Rifle built 1990.

Retaining 99%+blue and with an excellent bore.

.

Heppler & Heilmann Custom Mauser 98 .338'06 $7,495

23" tapered round Krieger barrel. Fully figured European walnut stock by

Keith Heppler with ebony forend tip, classic borderless wrap-around point-

pattern checkering, inletted swivel bases, 2-screw steel-capped pistol grip,

hint of Shelhamer chinstrap, classic comb with beaded cheekpiece, and

widow's-peaked Silvers red rubber recoil pad. Metalwork by Steve Heilmann:

fully polished FN Mauser action with jeweled bolt and follower, 2-panel

checkered bolt knob, Blackburn trigger, Wisner Model 70-type safety,

Blackburn bottom metal pillar-bedded at front and with hinged straddle

floorplate with release inside triggerguard. Hand-filed bolt-release tab and

with fire-blued retaining spring. Swarovski 3-10x42A Habicht scope with 4A

duplex reticle in Talley fixed rings on Heilmann custom bases. Pull: 13 3/4".

Weight: 8lbs, 8oz. With paperwork from makers, loading data, loading dies,

and 60 rounds new Weatherby brass. Built 2002. Little used.

.

Steven Dodd Hughes Custom Winchester 7x65R $8,450
       & Ralf Martini  1885 High Wall 

26 1/2" tapered octagon Krieger barrel with full integral rib, raised at muzzle for

brass-insert front bead and raised towards breech with quarter rib for 1

standing and 1 folding express sight and dovetailed for front Talley ring

without separate base. Fully figured European walnut stocks with ebony

forend tip, classic point-pattern checkering, steel capped pistol grip, beaded

pancake cheekpiece and Silvers red rubber recoil pad. Sling swivels to barrel

and toe of buttstock. Border scroll engraving by G Alcorn. SDH cartouche

in gold on breech end of barrel. Winchester 1885 High Wall action with

casehardened trigger, hammer and loading lever. Engraved and fire-blued

screws. Casehardened Talley 1" quick-detachable rings. Pull: 14". Weight:

7lbs, 3 1/2oz, with rings. 99%+blue. With dies & cases.

.

Monty Kennedy Custom Ruger No.1 .22-250 $3795

26" tapered round Ruger barrel with Buehler scope mount base. Densely

figured, oil finished European walnut stock with angled ebony forend tip,

classic wrap-around point-pattern checkering, crisp flat sidepanels,

checkered steel pistol grip cap, swivel studs, classic comb with beaded

cheekpiece, and checkered steel buttplate. All metalwork finished matte

blue. Canjar single-set trigger. Pull: 13 3/8". Weight: 8lbs, 11oz. Built in 1975

on 4-digit Ruger No.1 action. New condition.

.

Don Klein Custom Hagn Falling Block .300 H&H Mag. $14,950

26" tapered round Krieger barrel fitted by Martin Hagn and with detented-

hooded full-band front sight, full-band swivel base, quarter rib with 1

standing and 1 folding gold-lined express sight engraved for 100 and 200

yards, integral raised and dovetailed bosses to accept quick-detachable

Talley rings without separate bases, and with caliber inlaid in gold. Fully

figured, oil-finished, California English stocks with ebony forend tip, fine

classic wrap-around point-pattern checkering with mullered borders, gold-

rimmed forend escutcheon, beaded sidepanels front and rear, steel trapdoor

pistol grip cap, classic comb, double-beaded pancake cheekpiece, inletted

rear swivel base, and Biesen checkered steel buttplate. Scalloped-back,

casehardened, Hagn falling block action with sculpture-detailed loading

lever by Steve Heilmann, gold detailed top tang safety, engraved by Sam

Welch. Pull: 13 5/8". Weight: 7lbs, 14 1/2oz. Subject of a two-page spread in

Rifle Magazine, November 2001 (copy included). With extensive paperwork

pertaining to its construction during the period 1998 - 2001. With only a few

light scratches in the wood and virtually all of its original metal finishes.

Including the original match chamber reamer and targets.

.

Al Lind Custom Ruger No.1 .300 Win. Mag. $3575

26" tapered round Ruger barrel with Buehler scope mount base. Figured, oil

finished walnut stock with long angled ebony forend tip, beavertail forend,

wrap-around point-pattern borderless skip-line checkering augmented with

floral carving, flat sidepanels, steel skeleton pistol grip cap, classic comb

with beaded cheekpiece, and elephant hide covered recoil pad. All

metalwork finished bright. Single-set trigger fitted by Ed LaPour.

Pull: 14 1/2". Weight: 7lbs, 15oz. Built 2009. With paperwork. Little used.

.

Robert L. Mason Custom Winchester Model 70 .270 Win. $2,995

22" tapered round barrel. Figured walnut stock with ebony forend tip,

inletted swivel studs, borderless ribbon-and-fleur-de-lys checkering, steel

skeleton pistol grip cap (checkered within) beaded cheekpiece and thin

black Decelerator recoil pad. Pre-'64 Winchester Model 70 action with 2-

panel checkered bolt knob, built-up and checkered bolt stop, and Weibe

bottom metal; hinged straddle floorplate with release inside triggerguard.

Pull: 13 1/2". Weight: 8lbs, 7oz. Nearly new.

.

.
 

David Miller Co. Marksman (Custom .300 Wby. Mag. $8,975

Winchester Model 70)

26" fluted, tapered round barrel. Laminated wood stock with widow's-peaked

ebony forend tip, solid machined aluminum triple pillar bedding, double

ebony-plugged recoil crossbolts, inletted swivel studs, steel pistol grip cap,

vacant silver initial oval and Silvers-type solid red rubber recoil pad.

Winchester Model 70 left-hand controlled-feed action with jeweled bolt,

solid bottom metal with hinged straddle floorplate engraved .300 WBY, solid

magazine box, teflon-bushed follower engraved 4 CTGS and engraved hex-

head action screws. Leupold Vari-X III 6.5-20x matte-finish scope with

parallax adjustment, extended objective lens hood, and fine duplex

rangefinding reticle on David Miller's sturdy proprietary mount. Pull: 14 1/8".

Weight: 9lbs, 12oz. 99%blue.

.

Dave Norin Custom Mauser .30'06 $3,675

24" tapered round barrel with full-band front sight with fine standing and

folding twilight beads, full-band swivel mount, 1 standing and 2 folding

express sights on island base. Figured walnut stock with ebony forend tip,

classic borderless point-pattern checkering---wrapping fully under the

forend---steel trapdoor pistol grip cap, beaded cheekpiece, inletted rear

swivel stud and leather-covered recoil pad. Whitworth Mauser action, pillar-

bedded at rear, with jeweled bolt and follower, custom bolt knob---checkered

on the underside---casehardened cocking piece with Model 70-type safety,

hinged floorplate with release inside triggerguard and double-set triggers.

Leupold scope mounts with two-piece bases and casehardened 1" rings.

Pull: 14 3/4". Weight: 8lbs, 11oz. 99%blue. Excellent bore.

.

Mark Penrod & Custom Remington 700 .280 Remington $5995

Gene Simillion

23" tapered round Krieger barrel. Full grained, pillar-bedded walnut stock by

Gene Simillion with widow's-peaked ebony forend tip, inletted swivel bases,

Fisher steel pistol grip cap, beaded cheekpiece, classic wrap-around point-

pattern checkering with mullered borders and thin black Decelerator recoil

pad. Extensively reworked Remington 700 action with jeweled bolt, 2-panel

checkered bolt knob, Model 70-type safety, built-up and checkered Model

70-type bolt stop, sculptured trigger, flush barrel collar and custom bottom

metal with hinged straddle floorplate with release inside triggerguard.

Leupold VX-III 2.5-8x36mm matte-finish scope made 2005 with fine duplex reticle on

Leupold rings and custom bases. Pull: 13 3/4". Weight: 8lbs, 14oz.

Completed 2007 and in new condition with maker's target showing minute-

of-angle group.

.

Custom Ruger Model No.1 .375 H&H $5,975

Magnum

24" Gold-banded Ruger barrel with full-band front sight, full-band swivel

base, and matted quarter rib with folding leaf sight. Custom stocked with

highly figured American black walnut with rosewood forend tip, flat

sidepanels, classic borderless point-pattern checkering wrapping under the

forend and over the wrist (and with a much finer panel at the top of the

wrist), steel pistol grip cap, beaded cheekpiece, rear swivel stud and solid

red Old English recoil pad. Fine scroll engraving by Tommy Kaye on French

grey receiver and with fine bulino scenes of moose on left, elk on right, bear

on the grip cap and a gold flourish on the loading lever. Canjar single-set

trigger. Leupold Vari-X III 2.5-8x scope with fine duplex reticle on Ruger

mounts fitted directly to quarter rib without separate bases. Pull: 13 3/4".

Weight: 9lbs, 8oz. Very little used.

.
 

Gene Simillion Custom Model 70 .30-338 $16,950.

24" tapered round barrel with ramp front sight base with removable-covered

slot for sight insert, sculptured sling swivel mount, quarter rib with 1

standing ivory-inlaid and two folding gold-inlaid express sights and hidden

compartment holding front sight insert. Fully figured walnut stock by Gene

Simillion with ebony forend tip, barrel lug tiedown, fine borderless wrap-

around ribbon & fleur-de-lys checkering, screwless steel-capped pistol grip,

beaded pancake cheekpiece, inletted and pedestalled rear swivel mount,

and skeleton buttplate---checkered within. Winchester pre-'64 Model 70

action with sculptured rear tang extending over comb, jeweled bolt and

follower, 5-panel checkered bolt knob with rosette, custom tang safety,

custom trigger, built-up and checkered bolt stop, hinged floorplate with

custom release, and beaded triggerguard with long tang extending to grip

cap. Leupold VX-III 1.5-5x scope with fine duplex reticle on Talley quick-

detachable rings fitted to custom double-squarebridge bases. Exquisite

quality. Extensively engraved by Mitch Moschetti with art nouveau scroll---

much of it flush gold-inlaid. Pull: 14 1/4". Weight: 9lbs, 2oz. Appears unfired.

.

Gene Semillion / Noreen Model 70 .416 Rem. Mag. $15,975

Peter Noreen

24" Krieger tapered, round, lugged CM barrel with full-band detented-

hooded ramp front sight, full-band swivel base, matted quarter rib engraved

.416 REM MAG in gold, with standing ivory-inlaid express sight regulated

for 50 yards, and with two gold bands at breech. Highly figured European

walnut stock with widow's-peaked ebony forend tip, classic warp-around

point-pattern checkering with mullered borders, double engraved

crossbolts, steel trapdoor pistol grip cap, beaded cheekpiece, inletted and

pedestalled rear swivel base and solid red Decelerator recoil pad. Controlled-

feed action built by Peter Noreen with jeweled bolt with four-panel

checkered knob and gold-inlaid rosette at rear of firing pin, jeweled follower

with teflon bushing, checkered bolt stop, Model 70-type 3-position safety,

integral dovetailed double-squarebridge bases for quick-detachable Tally

mounts, engraved screws, Blackburn one-piece bottom metal with D'Arcy

Echols custom stainless extra-capacity magazine box, and hinged straddle

floorplate with release inside triggerguard. Schmidt & Bender 1.25 - 4x20mm

Safari scope with 30mm tube and No.9 duplex reticle on QD Talley TNT

rings. Pull: 13 3/4". Weight: 10lbs, 9oz. 99%+blue.

.

Gene Simillion Custom Winchester Model 70 .375 H&H Mag. $13,350

24" Krieger CM tapered, round, lugged barrel with full-band detented-

hooded ramp front sight, full-band swivel base, matted quarter rib engraved

.375 H&H in gold, with standing gold-lined express sight, and with two gold

bands at breech. Highly figured European walnut stock with ebony forend

tip, classic warp-around point-pattern checkering with mullered borders,

double engraved crossbolts, casehardened steel trapdoor pistol grip cap,

beaded cheekpiece, inletted and pedestalled rear swivel base and solid red

Decelerator recoil pad. Controlled-feed Winchester Model 70 action with

jeweled bolt with four-panel checkered knob and gold-inlaid rosette at rear

of firing pin, fire-blued extractor claw, jeweled follower with teflon bushing,

checkered bolt stop, Model 70 3-position safety on casehardened cocking

piece, engraved screws, custom double-squarebridge style dovetailed bases

for quick-detachable Tally mounts, Blackburn one-piece bottom metal with

D'Arcy Echols custom stainless steel extra capacity magazine box, and

hinged straddle floorplate with release inside triggerguard. Zeiss Diavari

1.25 - 4x24mm T* scope with 30mm tube and No.8 duplex reticle on QD

Talley TNT rings. Pull: 13 3/4". Weight: 10lbs, 11oz. 99%+blue.

.

Duane Weibe Custom 1909 Argentine Mauser .500 Jeffrey $14,975

23" tapered round barrel with detented-hooded full-band front sight, full-

band swivel base, and another full band mounting a single folding express

sight at the top and a sturdy recoil lug on the underside. Figured straight

and strong European walnut stock with ebony forend tip, classic flat-topped

point-pattern checkering with mullered borders wrapping fully under the

forend and over the wrist, twin engraved recoil crossbolts, casehardened

steel trapdoor pistol grip cap, classic comb, beaded pancake cheekpiece,

inletted rear swivel base, mercury recoil compensator inside butt, and

Silver's red rubber recoil pad. Remarkably slick-operating DWM Mauser

Argentine 1909 action with single squarebridge incorporating sturdy peep

sight adjustable for windage, straight-down bolt handle with pear-shaped

knob, original Mauser trigger and safety, custom bottom metal fully-

machined from solid steel including drop-box magazine with hinged straddle

floorplate and release inside triggerguard. Pull: 14 3/8". Weight: 11lbs, 2oz.

Little used.

.

Duane Weibe Custom G33/40 Mauser .280 Remington $7,995

24" tapered round barrel engraved D W WEIBE - GUNBUILDER. Fully

figured European walnut stock with ebony forend tip, inletted swivel bases,

classic point pattern checkering wrapping fully under the forend and over

the wrist, steel pistol grip cap, beaded cheekpiece, gold initial oval, and solid

brown Decelerator recoil pad. Pillar-bedded Mauser G33/40 action with

jeweled bolt and follower, Timney trigger, Model 70-type safety, 3-panel

checkered bolt knob, hinged straddle floorplate with release inside

triggerguard and engraved screws. Leupold Vari-X III 2.5-8x matte-finish

scope with fine duplex reticle on factory rings and custom bases. Pull: 13

1/2". Weight: 7lbs, 15 1/2oz. Little used and with excellent bore.

.
   

Custom Winchester Model 54 Rifle .270 Win $2,475

24" Winchester barrel with Super Grade swivel incorporating barrel tiedown,

and with blanking plate in rear sight dovetail. Classic vintage custom stock

of figured, oil-finished walnut in Griffin & Howe style with ebony forend tip,

classic wrap-around point-pattern checkering, Winchester black hardrubber

pistol grip cap, beaded pancake cheekpiece, and Winchester checkered steel

buttplate. Lyman 48 receiver sight. Pull: 14". Weight: 8lbs, 4oz. Action mfd

1933. Fine condition.

.

                                  

English Shotguns American Shotguns European Shotguns Combination Guns
Custom Rifles Magazine Rifles Single Shot Rifles Double Rifles
Handguns Antique Guns Custom Knives Other Neat Stuff
       
Who We Are How to Order Sell your Guns Fine Gun Gallery
Firearms Dictionary Magazine Articles Useful Links New Arrivals

 


Hallowell & Co., Inc. PO Box 1445. Livingston, Montana  59047   USA  

Tel: 406 222-4770         Email: morris@hallowellco.com

Hours: Monday - Friday, 10 - 6.   (Mountain Time)  

Our inventory is constantly changing. Please bookmark this site and return often.

 

Contents 1996 - 2022 Hallowell & Co., Inc.